INSIDE OUR FACTORY · EMBROIDERY DEPARTMENT

Multi-Head Embroidery for Custom Teamwear

Team identity, built stitch by stitch.

Computerized embroidery turns approved artwork into stitched logos, crests and lettering. Explore TONTON’s workshop, see the JIAYU-branded machines at work and understand what to confirm before your custom sportswear order moves into production.

Discuss your embroidery project →Watch the workshop video ↓

Actual workshop photograph · Multi-head embroidery equipment

Computer-controlledDigitized stitch paths and color sequences

Multiple headsRepeat an approved design across panels

Thread-based brandingLogos, crests, lettering and garment details

Sample firstConfirm the result on the selected fabric

01 / MACHINES, NEEDLES & THREAD

One approved design. Multiple working heads.

Each head carries a set of needles and colored threads. The embroidery program controls stitch movement and color changes; multiple heads can work on repeated versions of the same design.

Front view of multiple JIAYU embroidery heads and their thread-tension controls — **Machine heads.** Needles and thread controls arranged across the production line.

Colored thread cones above multi-head embroidery equipment at TONTON — **Thread colors.** Color selection follows the approved design and sample.

Angled view along the row of TONTON embroidery machine heads — **Repeated production.** Parallel heads support repeat embroidery work.

JIAYU branding is visible in the supplied material. Ask the team for project-specific equipment information; no exact model, speed or head-count claim is made here.

02 / FROM ARTWORK TO STITCHES

Develop the stitch result before repeating it

Artwork review → digitizing → material and setup review → sample approval → batch embroidery → garment completion.

TONTON operator preparing material at an embroidery workstation — Workstation preparation · Fabric and embroidery setup

01 / PREPARE & SAMPLE

Translate the logo into embroidery instructions

Confirm artwork, finished dimensions, placement and thread colors. Digitizing defines the stitch paths and sequence; the fabric and design guide the stabilizer and setup choices.

Review an actual sew-out rather than relying only on an artwork preview.

JIAYU embroidery heads working over dark sportswear panels at TONTON — Embroidery production · Machine heads and garment panels

02 / STITCH & REPEAT

Follow the approved design through the run

Use the confirmed embroidery program, thread colors and placement. Multi-head production repeats the design across prepared panels or suitable garments.

Personalized names or numbers need a roster and production plan; variation between pieces is a separate coordination step.

Lettering panel and material in the TONTON embroidery work area — Lettering panel · Supplied workshop detail

03 / REVIEW & COMPLETE

Check the detail as part of the finished garment

Review letter shapes, edges, placement, fabric appearance and the reverse side. Check the embroidery against the approved sample before the garment moves through the remaining operations.

Embroidery may take place on panels before assembly or on suitable assembled garments, depending on access and construction.

Repeated dark garment panels laid out along TONTON multi-head embroidery equipment — Repeat embroidery production · Actual workshop photograph

03 / WORKSHOP VIDEO & BRAND FILM

See the machine. See the stitch detail.

Workshop footage

JIAYU heads stitching colored lettering on black fabric. This supplied clip documents the machine operation.

Open workshop video →

720p is selected by default. Select 1080p for extra detail. Quality changes keep your playback position.

PROMOTIONAL PRESENTATION

Embroidery brand film

A supplied, stylized film presenting embroidery textures and TONTON branding. It is an illustrative presentation; use the workshop footage and photographs as the factory documentation.

Open brand film →

04 / APPLICATIONS & PROCESS CHOICES

Choose the finish for the garment and its use

Team crests & brand logos

Develop chest or sleeve branding for suitable teamwear, club apparel and sports garments.

Names, numbers & lettering

Review legibility at the intended size, thread coverage, placement and any personalized roster.

Appliqué & patch projects

Discuss material layers, outline stitching, patch edges and attachment requirements through a sample.

Side view of embroidery heads and dark garment panels in the workshop — Garment panels at the embroidery line · Actual photograph

Special finishes need a separate capability check

Chenille or towel embroidery, 3D foam embroidery and cap embroidery require the appropriate equipment, attachments and setup. Their availability cannot be established from standard multi-head machine photographs alone.

Send a reference of the effect you want. The team will confirm the route and sample rather than treating every technique as interchangeable.

05 / SAMPLE & QUALITY REVIEW

Look beyond the front of the logo

Agree the inspection points for your project. These are buyer review considerations, not a claim of a published test result or a fixed factory inspection standard.

Artwork & color

Correct design version, spelling, dimensions, placement and thread-color reference.

Stitch appearance

Letter clarity, outline registration, coverage, loose threads and clean finishing.

Fabric & reverse side

Puckering, distortion, backing visibility, stretch and comfort against the skin.

Order matching

Correct panel, size, name or number, plus the required quantities.

Test the selected performance fabric

Lightweight or stretchy fabrics need a suitable design and stabilizer. Review the sewn result on the intended material, including stretch and skin contact. For close-fitting rash guards, confirm whether embroidery, a patch or sublimation best suits the proposed area.

Compare our sublimation printing route →

06 / BUYER PREPARATION

What to send for an embroidery project

Central view between rows of TONTON embroidery equipment — Embroidery workshop · Equipment and work areas

Logo or artwork, plus any reference embroidery.
Finished width and height, and chest, sleeve or other placement.
Product, fabric and panel or garment construction.
Thread-color reference and required visual effect.
Quantities by size and any name or number list.
Sample, testing, delivery and destination requirements.

Final embroidery files are not required to start a discussion. Confirm the physical sample and project specification before bulk production.

Start your project brief →

EMBROIDERY FAQ

Questions buyers ask

What does a computerized multi-head embroidery machine do?

It follows a digitized embroidery program to stitch thread into a selected fabric or garment panel. Multiple heads can repeat the same approved design in parallel, while programmed needle changes select the required thread colors.

What embroidery equipment is shown in TONTON’s workshop?

The supplied workshop photographs and machine video show multi-head embroidery equipment with visible JIAYU branding. Exact model, head count, embroidery field, needle count and production speed are not specified on this page.

Can TONTON embroider team logos, names and numbers?

Team crests, brand logos, lettering, names and numbers can be developed for embroidery, subject to the design, size, fabric and placement. Personalized names and numbers need an approved roster and a suitable production plan; different heads should not be assumed to stitch different designs simultaneously.

Can the pictured machines make chenille, 3D foam embroidery or embroidered caps?

These techniques depend on the machine configuration, attachments, materials and setup. The pictured standard embroidery heads alone do not confirm chenille, 3D foam or cap capability. Send the required effect and product so the team can confirm the process and sample.

Can embroidery be used on stretch sportswear?

Suitability depends on the fabric, design size, stitch density, stabilizer and placement. Review a sew-out on the selected material for puckering, stretch, backing visibility and comfort against the skin. Do not assume the same embroidery setup suits every rash guard, jersey or performance fabric.

What should I approve before bulk embroidery?

Confirm the artwork version, finished size, placement, thread colors, fabric or panel, backing approach and any names or numbers. Review a physical stitch sample on the intended material before approving the bulk production setup.

Wide view of embroidery machines and production tables in the TONTON workshop — Workshop overview · Supplied factory photograph

Connect embroidery with your full teamwear project

Explore the relevant buyer program, then share the garment and branding requirements.

Academy and team procurement →

Independent brand development →

Full factory workflow →